Research Article

Validation of a reaction volume reduction protocol for analysis of Y chromosome haplotypes targeting DNA databases.

Published: April 28, 2017
Genet. Mol. Res. 16(2): gmr16029652 DOI:
Cite this Article:
C.A. Souza, T.C. Oliveira, S. Crovella, S.M. Santos, K.C.N. Rabêlo, E.P. Soriano, M.V.D. Carvalho, A.F.Caldas Junior, G.G. Porto, R.I.C. Campello, A.A. Antunes, R.A. Queiroz, S.M. Souza (2017). Validation of a reaction volume reduction protocol for analysis of Y chromosome haplotypes targeting DNA databases.. Genet. Mol. Res. 16(2): gmr16029652.


The use of Y chromosome haplotypes, important for the detection of sexual crimes in forensics, has gained prominence with the use of databases that incorporate these genetic profiles in their system. Here, we optimized and validated an amplification protocol for Y chromosome profile retrieval in reference samples using lesser materials than those in commercial kits. FTA cards (Flinders Technology Associates) were used to support the oral cells of male individuals, which were amplified directly using the SwabSolution reagent (Promega). First, we optimized and validated the process to define the volume and cycling conditions. Three reference samples and nineteen 1.2 mm-diameter perforated discs were used per sample. Amplification of one or two discs (samples) with the PowerPlex Y23 kit (Promega) was performed using 25, 26, and 27 thermal cycles. Twenty percent, 32%, and 100% reagent volumes, one disc, and 26 cycles were used for the control per sample. Thereafter, all samples (N = 270) were amplified using 27 cycles, one disc, and 32% reagents (optimized conditions). Data was analyzed using a study of equilibrium values between fluorophore colors. In the samples analyzed with 20% volume, an imbalance was observed in peak heights, both inside and in-between each dye. In samples amplified with 32% reagents, the values obtained for the intra-color and inter-color standard balance calculations for verification of the quality of the analyzed peaks were similar to those of samples amplified with 100% of the recommended volume. The quality of the profiles obtained with 32% reagents was suitable for insertion into databases.